Anji Cazen Hardware Factory Limited is one of the leading manufacturers and suppliers of steel chair chrome armrest in China. With abundant experience, we warmly welcome you to buy durable steel chair chrome armrest at competitive price from our factory. If you have any enquiry about cooperation, please feel free to email us.
Model Number: JC-012
Product Name: Steel Chair Chrome Armrest
Specs: Steel Tube 40X20mm
Color: Chromed
PASS BIFMA or NOT: Yes
Usage: Steel Manager Chairs
Description: Steel Chair Chrome Armrest pass BIFMA testing, made by steel tube, 40X20mm, thickness=1.2mm, for the steel manger chairs.
If you want to find a supplier with high quality good chroming armrest, we are your best choice, since 2004, with good qualit control, good service and competitive price. Customers from all of the world more than 50countries with good reputation!
BIFMA Arm Durability Test - Cyclic (Figure 20a and 20b) Purpose of test
The purpose of this test is to evaluate the ability of the chair armrests to withstand stresses that occur as a result of repetitive loading that can be imposed on the armrest structure. Loading of this type is the result of using the armrests as a support when getting out of the chair. 20.2 Test setup If necessary, the seat may be restrained from rotational movement. Clamping shall be done in such a manner as not to restrict the arms of the unit. b) Height-adjustable arms must be set at the apparent weakest position. When the weakest position is not obvious, several load application positions may be necessary to properly test the product. c) Width-adjustable arms must be set at the apparent weakest position. d) Unrestrained pivoting armrests (i.e. the armrest cap pivots freely) shall be loaded in line with the pivot point. e) The arm loading device should distribute the load over a length of 100 mm (4 in.) on the arm pad. The center of load shall not be applied more than 25 mm (1.0 in.) in from the inside edge of the arm pad. One suggested arm loading device is shown in Figure 20a. Position the arm loading device on the armrest structure at its apparent weakest point consistent with using the armrest as support for exiting the chair. 20.3 Test procedure Simultaneously apply a force of 400 N (90 lbs.) to each arm initially at a 10° ± 1° angle as shown in Figure 20b. If using a test device similar to that shown in Figure 20b, the load application distance must initially be the length specified in the figure. Other methods of applying the load are acceptable if the force and angle applications are equivalent. The arm loading device must follow the arm as it deflects or pivots. The force shall be applied and removed for 60,000 cycles at an appropriate rate between 10 and 30 cycles per minute. 20.4 Acceptance level Structural breakage or loss of serviceability shall constitute failure. a) The chair shall be placed on a test platform in an upright position as shown in Figure 20b.
Anji Cazen Hardware Factory Limited is mainly producing and selling the office chair parts for over 10 years, with skilled workers more 200, most of the workers have worked in our factory for more than 10 years, and with 20 R&D workers, 10 QC, and a good professional sales service team.
Now we are one of the Top largest manufacture for the chair bases, armrests, mechanism and other office chair parts in Anji Area, with sales turnover more than $15,000,000.
We are long term and appointed supplier for STAPLES, OFFICE DEPOT, IKEA, GLOBAL FURNITURES, and so on.
Inspection service
Our professional QC team will inspect the goods for every cargo,and insure our goods no problem then load the goods.
Shipping service
1. We book container, and then arranging the shipment according to customer need.
2. Making shipping documents once the goods are loaded.
Hot Tags: steel chair chrome armrest, China steel chair chrome armrest manufacturers, suppliers, factory
